• Manganese steel or rubber tracks transport workpiece, shots thrown on continuously overturned workpiece.
• High strength body shell, chain drive, electric controlled by PLC.
• Adopt full curtain type particle separator, which equipped with feeding port to supplement pellet.
• Suit for surface cleaning and strengthening of castings, forgings, stamping parts and non-collision parts.
The single-column hydraulic press is of single C-arm design, which allows the operator to approach the working area from three directions and characterized by high guiding precision and good structural rigidity. The press is widely used for correcting and pressing of metal products.
• Use high voltage static electricity to make liquid oil atomized and adsorbed on the metal surface.
• Composed of oil chamber, upper and lower knife beams, high pressure system, oil supply device and oil tank.
• The coating film is uniform thin, the coating amount is adjustable and controllable, with reliable work.
• Suit for oiling to metal surfaces such as strip steel and parts in the production line.
• Steel grit is thrown by shot blaster onto the roll surface at high speed, making it rough and textured.
• Shot blaster directly connected with motor, shot ejection and roll rotation adjusted by frequency control.
• Blasting amount precisely controlled by PLC, textured roughness controlled, high texturing efficiency.
• Suit for roughening and texturing the roll surface in metallurgical rolling mills and skin-pass mill.
• The workpiece is conveyed by high strength wear-resistant rubber track or manganese steel track.
• Shot blasting device shoot high-speed shots to the overturned workpiece on the track to clean it.
• Automatic monitoring, automatic protection and frequency control devices, with multiple uses.
• Suitable for cleaning and strengthening of castings, forgings, aluminum, stainless steel, copper parts.
• High strength wear-resistant crawler conveying workpiece, grit thrown to the workpiece to clean rust.
• Good cleaning effect, compact structure, good completeness, low noise.
• The workpiece can be discharged automatically after cleaning.
• Suit for surface cleaning and shot blasting of various varieties, large or medium batch small workpieces.
• Using rubber tracks attached end to end to form a space roller, the workpiece is continuously turned over.
• The speed and flow of shot blasting material can be adjusted, the electric is controlled by PLC.
• The shot/sand separator equipped with roller screen, automatically separate large particles of impurities.
• Used for surface cleaning, polishing and shot blasting of various forgings, heat-treated and metal parts.
• Manganese steel or rubber tracks transport workpiece, the shot blaster blasts steel grit to clean workpiece.
• Shot blaster directly connected with motor, blasting amount and shot speed controlled, electrical by PLC.
• The shot/sand separator equipped with roller screen, automatically separate large particles of impurities.
• Suitable for surface cleaning or shot blasting of castings, forgings, aluminum and stainless steel parts.
• Workpiece hung, reciprocating and rotating, shot blasting device will shot steel sand to clean it.
• Shot flow and shooting speed can be adjusted, blasting amount is precisely controlled by PLC.
• The dust be discharged by cyclone and core-cartridge dust collector.
• Used for cleaning and strengthening of steel structure, casting, forging, aluminum alloy and other parts.
• Workpiece hanged, reciprocating and rotating, shot blaster device shots the steel grit to clean it.
• Shot blaster directly connected with motor drive, shot flow adjustable, electrical PLC control.
• Compact structure, good cleaning quality, cyclone and pulse bag filter for dedusting.
• Suit for surface treatment of die cast, magnesium alloy, copper cast, stainless steel precision castings.
• Workpiece hung, reciprocating and rotating, shot blasting device will shot steel sand to clean it.
• Manual door opening/closing, with sealing performance and good protective effect.
• Double hooks not change rail, two-stage dust removal of projectile settling chamber and cloth bag filter.
• Used for cleaning and strengthening of steel structure, casting, forging, aluminum alloy and other parts.
• Workpiece hanged and turns rotating, shot blaster device shots the steel grit to clean it.
• The shot blasting flow is adjustable, the electricity is controlled by PLC.
• High production efficiency, can produce many varieties at the same time, high cost performance.
• Suit for surface treatment or strengthening of small or medium castings and forgings, steel structure parts.