The CCD linear scanning sensor is capable of accurately detecting the strip edge and center positions, it constitutes strip edge position control system together with the control system and servo valve to achieve automatic strip centering during operation to keep the strip edge always running within the allowable deviation range.
The standard photoelectric sensor, working based on the photoelectric technology, converts the measured non-electrical physical variables to the light signals, which will be then converted to the electrical signal for control. It is widely used in detection, control, industrial automation equipment and robots, etc.
The pressure sensor is a device used for sensing the pressure signal and converting it to a usable electrical signal according to a certain rule. The BSP series pressure sensor is widely used in various industrial automation environments, and especially suitable for monitoring and measuring the pressure of gaseous, liquid and viscous media.
The limit switch is an electrical component that switches the circuit according to the position of the moving part. It consists of an operating head, contact system and housing. It is suitable for limiting the position, detecting intermediate position, end point protection of metallurgical equipment, machine tools, lifting machinery and other equipment.
The sensor converts the sensed temperature to adequate output signal. It is equipped with thickened protective cap, imported temperature chip, and can be bent in installation. The armored temperature sensor can directly measure the temperature of liquid, steam and gaseous media as well as the temperature of solid surfaces in different production processes.
• A non-contact photoelectric measuring device for high precision online measurement of hot rolled strip width.
• With the functions of comprehensive diagnosis, online calibration and verification, online measurement, etc.
• Fast head response speed and data processing speed, high measurement accuracy and long service life.
• For online steel strip width measurement in the rough rolling and finishing rolling line of hot rolling line.
The SMI inductive sensor detects the strip based on measurement principle of electromagnetic induction. Together with the control system and servo valve, it forms the plate-belt alignment system(CPC). SMI inductive sensor is widely used for on-line correction of different kinds of strip production lines in the fields of machinery, metallurgy, electroplating and so on.
The pressure sensor is a device used for sensing the pressure signal and converting it to a usable electrical signal according to a certain rule. Made of alloy steel, it has strong compressive strength, wide measuring range and high accuracy. It is always seen in various industrial automatic control environments.
The photoelectric sensor is an infrared modulation type nondestructive sensor with high-efficiency infrared light-emitting diodes and photosensitive triodes as photoelectric conversion elements. It features fast response and a receiver that is protected from external interference. Widely used in metallurgy, completion and other industries as input interface signal.
Capacitive detector is specially applicable for the strip processing industry to accurately sensing the strip position. It constitutes center position control system together with the control system and servo valve. The detector is widely used for online strip centering in the production line of machinery, metallurgical, electroplating and other sectors.
Capacitive centering sensor is specially used in strip processing industry to provide users with accurate strip position detection. Together with the control system and servo valve, it forms the plate-belt alignment system(CPC). It is widely used for on-line correction of different kinds of strip production lines in the fields of machinery, metallurgy, electroplating etc.
The optical edge detector control system, servo valve and other components of the strip edge system, used for edge correction of the strip in the process of automatic edge alignment, packaging strip edge position within the permitted deviation range.